SF20 internal heritage sliding doors

SUNFLEX

SF22 internal heritage sliding doors

The single glazed SF22 heritage sliding doors are a stylish option for dividing open plan living spaces. With 30mm horizontal bars across the glass, the system takes inspiration from the steel doors of the Art Deco era.

Floorplan and layout icon

Divide open plan spaces

The flush track of the SF22 makes it a perfect option for dividing up open plan spaces in your home - whether that be separating a kitchen from living/dining room, dividing a bedroom from a walk-in wardrobe, dressing room or en-suite or acting as a partition between home and gym or swimming pool.

Design icon

Flexibility in design

The SF22 heritage doors can be designed with panels that open from the centre or from one (or both) ends, they can even be designed to open up a 90-degree corner if required. The system can be designed to accommodate a single panel all the way up to a 12-panel system and with panels from 300mm to 1600mm wide and from 500mm to 2600mm high.

Pocket sliding door icon

Pocket sliding doors

To enable a completely seamless appearance when opened, the doors can be designed on an extended track to slide into a pocket inside the wall - completely hiding them away from sight.

Home design icon

A wide range of uses

Whilst the single glazed SF20 heritage doors are predominantly used as internal room divider, the versatility of design enables them to also be used as a glazed balcony surround or to enclose a patio or outdoor kitchen to protect from wind and rain.

Smooth operation icon

Effortless operation

The bottom-running design of the SF22 system ensures effortless movement of the sliding panels. The ball bearing-running mechanism is concealed within the bottom frame of the panel, limiting exposure to dirt and debris and providing quiet operation.

SF20 track icon

Handle and track design

The SF22 heritage doors are available with a stainless steel recessed handle that sits almost flush to the glass whilst the track (which is just 11mm deep) can be recessed into the floor to create a completely level finish. Where the track cannot be recessed an add-on can be attached to create a step-free finish.

Glass Icon

Glazing options

Depending on your specification of 8mm or 10mm, toughened safety glass manufactured to BS EN 12600 standard can be used. This can be low iron, tinted, patterned or even obscured if required.

Get a quote for SF20 internal heritage doors

Please send us your details, along with measurements for the opening, and we'll get back to you with a quote.

    All fields marked with * are required.
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Match the doors to your decor

    Customise your doors to your home

    Choose from more than 200 RAL classic colours in semi-gloss finish, including Graphite Black (RAL 9011) and Antracite Grey (RAL 7016), or opt for Jet Black (RAL 9005) for the more traditional steel door appearance.

    IDSystems Colour Range